One-way bearings can be designed to carry axial loads in only one direction and therefore are adjusted relative to a second bearing or a bearing installed as a bearing set. The standard bearings can be paired at will, and a bearing group can be composed of up to four bearings in various configurations to achieve t...

Bidirectional thrust angular contact ball bearings are designed for bidirectional positioning of spindles. These bearings are combined with cylindrical roller bearings of the NN 30 K or N 10 K series and mounted in the same housing bore. This bearing combination simplifies the machining of the housing bo...

Including a shaft washer, two seat washers and two steel ball-cage assemblies. The seat washer and steel ball-cage assembly used in two-way thrust bearings are the same as those used in one-way thrust bearings. Can withstand bidirectional axial load and can perform bidirectional axial positioning

Includes a shaft ring, a seat ring and a steel ball-cage assembly It can only bear axial load in one direction and can only perform axial positioning in one direction. Bearing characteristics: separable and interchangeable The separate components of thrust ball bearings are interchangeable. This facilitates insta...

Self-aligning ball bearings have two rows of spherical rolling elements. The outer ring has a common spherical raceway, and the inner ring has two deep groove continuous raceways. They can be open or sealed. This type of bearing allows large angular displacements of the shaft relative to the bearing housi...

Four-point contact ball bearings are radial single-row angular contact ball bearings whose raceways are used to support axial loads acting in two directions. For a given axial load, limited radial loads can also be supported. The bearing is of separate design, that is, the outer ring with ball and cage assemb...

The double row angular contact ball bearing design corresponds to two single row angular contact ball bearings arranged back to back. Bearing characteristics: Can be used in applications where two single row angular contact ball bearings arranged back to back occupy too much axial space. Can withstand radia...

Single row angular contact ball bearings can only bear axial load in one direction. This type of bearing is usually adjusted relative to the second bearing. Their bearing rings have upper and lower shoulders and are inseparable. Bearing characteristics: The lower shoulder allows a larger number of balls to be...

Can be mounted on all drop-in bearings, except those with standard inner rings. Used primarily to "pad" drop-in bearings in stamped steel bearing housings. To isolate vibration and noise. Can be used to slightly displace the bearing within its housing to Sustains minor shaft expansion or misalignment with...

Suitable for applications where smooth operation is a key operating parameter. The bore diameter has a normal tolerance and is installed on the shaft with an appropriate interference fit. Compared with other embedded bearings, it can withstand heavier axial loads and can handle accordingly. Sealed deep gr...

Single row deep groove ball bearings with ball loading gaps have a ball loading gap on the inner and outer rings to accommodate more steel balls than standard deep groove ball bearings. The radial load-carrying capacity of bearings with ball-loading gaps is greater than that of bearings without ball-loading g...

Stainless steel deep groove ball bearings are available in two designs: open or closed (with seal or dust cover). Open bearings can also be equipped with seals or dust covers, and there are usually grooves on the sides of the inner ring. The load carrying capacity of these bearings is lower than that of high chr...

Single row deep groove ball bearings are available in two designs: open or closed (with seal or dust cover). Open bearings can also be equipped with seals or dust covers, and there are usually grooves on the sides of the inner ring. Inch bearings in the EE(B), RLS and RMS series are intended for use as a...

Double row deep groove ball bearings are ideally suited for use in bearing configurations where the load carrying capacity of single row deep groove ball bearings is insufficient. For double-row deep groove ball bearings with the same outer and inner diameters as single-row deep groove ball bearings, their w...